• Intelligent Pumps
  • Models
  • Prices

The world's most intelligent pumps are a "no brainer"

A breakthrough in energy-efficiency and service life, the IntelliFlo® pump allows programming for 4 different speeds (VS Model) or fully automated flow control (VF Model) for different pool, spa or water features applications.

With the VS Model,By dialing in the minimum speed required for a task, the pump works less and uses less energy. Pump speeds are easily adjusted with the push of an up or down arrow button.

With the VF Model, all you do is input the volume of the pool , the length of time for the pool pump to run and the required number of turnovers per day and the pump automatically senses water temperature, system pressure and flow and will automatically adjust itself to the most energy efficient flow rate and relative power consumptionto achieve those goals

The IntelliFlo® pumps are the revolutionary way to reduce energy costs and meet the desire for the safest pool possible. These “intelligent” pump's can help cut the pool portion of utility bills up to 90% and save you hundreds of dollars per year and thousands of dollars over its life. On the safety front, you install a Safety Vacuum Release System (SVRS) that senses drain blockage and automatically shuts the pump off in seconds to provide an important layer of entrapment protection.

An Eco Select™ Choice: Standard pool pumps can consume as much energy as all other home appliances combined?often costing more than $1,000 per year! IntelliFlo pumps can typically cut energy use by 30% to 90%, generally saving $620 to $1,350 in utility costs annually...more where rates are higher than average.*

Energy efficient, Reliable Economic A Pump for all OccasionsThe flagship model VF 3060 & VS 3050 picture of intelliflo pump

The Pentair Intelliflo 3050 pumps offer new levels of reliability safety & performance, real work horses without the expensive horse power.

 

30% Plus eEnergy savings.

Simple operation

Long Life

Very quiet in operation

Intelliflo pumps use a permanent magnet motor , the same type of motor used in Hybrid cars, which are far more energy efficient resulting in a "base energy saving" from the motor alone of 30%

The intelliflo variable digital speed controls and custom firmware allow the optimum pump speed for your filtration system. In nearly all cases the optimal speed will be lower than the pre set speed of regular single speed pumps.
Using a lower speed will take advantage of the fact that when a pump runs slower, less energy is used. When pump speeds are reduced by half, energy consumption is just one eighth of the pump running at full speed. The result is a saving of up to 90% on energy prices. The Flagship VF3050 Model is fully computerised and can automatically adjust the flow rate for optimum performance tailored to your pool.
This means that if you want the volume of your pool water turned over once a day, the pump will calculate the number of hours required to do that depending on how long you set the pump operation time.
For example you want the pool volume turned over in 8 hours the pool will adjust the flow rate and power consumption to match, if you want the same volume turned over but you want the pump to run for 24 hours the pump will adjust the flow and power consumption so that whether you run the pump for 8 hours or 24 hours the power consumption and cost will be the same.

 

IntelliFlo Pump VS 3050 (Variable Speed)    1,695.00 (Euro)
 
IntelliFlo Pump VF  (Variable Flow)             1,895.00 (Euro)
Eco logo